Friday, April 5, 2013

Review: Bontrager Race X Lite TLR Wheelset

The first time I tried tubeless tires was about ten years ago. I had purchased a top of the line pair of Bontrager mountain bike wheels. These were the ones with the Chris King hubs and the ceramic coated rims. These wheels were, and still are, hot stuff, but I wanted to try tubeless. So I marched into my local bike shop and asked what I needed to do to go tubeless. To my surprise, they sold me a pair of simple plastic rim strips that were designed to make my wheels to tubeless compatible. I easily inserted the rim strip, which required no adhesive, and never used a mountain bike tube again. The rim strip goes from bead hook to bead hook, and has the appropriate valve hole as well. And, it is removable and reusable when a spoke needs replacement.

Flash forward ten years, and I have just received a pair of Bontrager Race X Lite TLR road wheels and TLR tires (look for a review of these tires here soon). TLR stands for Tubeless Ready, and they come with the exact same plastic strip as I still use on my Bontrager mountain bike wheels.

And do you know what? It works as good on my road bike today as it did on my mountain bike over the last ten years.

Unlike conversion strips, there is no time consuming installation to worry about, it just pops on. And it only gets easier from there. I then proceeded to quickly install a the included Bontrager tubeless valve and a pair of Bontrager TLR Road tires. In fact, I was able to inflate the tires with a hand pump instead of a compressor.

Some background

The company's namesake Keith Bontrager, was a pioneer in mountain bike tubeless tires. Nevertheless, the company, now owned by Trek, made some early missteps in the area of road tubeless. The company hoped it would find success by re-branding tires from another manufacturer for use with wheels from a third party. When this strategy did not meet their expectations, the old product was pulled and they went back to the drawing board.

Their new TLR line contains three dedicate road tubeless wheelsets, the entry level Race TLR, the mid level Race Lite TLR, and their top of the line Race X Light TLR.

My impressions

Several things jumped out at me about the Race X Lite TLR wheels. At 23mm, the rims are wider than most road clinchers, usually 19-21 mm wide. The result is that the tires have a greater volume and width when inflated. Therefore, cornering is naturally enhanced. There is a reason that road racing motorcycles have such wide tires.

Next, I noticed that while wide, these rims are not very deep or pointy. The 23mm wide rim and and 23mm wide Bontrager TLR tires I tested had a cross section that might look like that of an egg, In contrast, I would describe most aerodynamic clinchers wheels and tires have these days as having a cross section like a big scoop of  ice cream on a pointy cone. So with Bontrager's design, you get a wider, more stable feel without really sacrificing weight.

Another interesting feature of these wheels is what Bontrager calls "Locally reinforced spoke nodes [that] reduce rim weight without sacrificing strength."  Translation: there is extra aluminum around the spoke holes where you need it, and less material between the spokes where you don't.

These wheels feature 18 spoke front and 24 spoke rear DT 14/17 bladed spokes in a straight pull configuration.
The result is that the weights come it at 642 grams front, 798 grams rear, and 1,410 grams total. These is not the lightest tubeless aluminum clincher out there, but they are pretty darn close. And it more than makes up for a few grams here or there by looking very cool! and if that doesn't do it for you, consider that you can replace drive side spokes, the ones most likely to fail, without removing your cassette.

In fact, these are the same Shimano/SRAM compatible, 10/11 speed hubs featured on their Aeolus line of carbon rimmed wheels, which retail for over $2,000 a pair.

Few downsides

I really like these wheels, but I have a few minor quibbles that are worth mentioning. First, it comes with quick release skewers, but they seem a little on the heavy side.Actually, they appear to be the same skewers included on many of their less expensive wheel sets.Therefore, skewer sommeliers out there might not find them to be a very good match for a wheel set of this caliber. I would be just as happy to see these wheels sold without quick release skewers in the same way that most high end bicycles are now sold without pedals. This would save money and allow the rider to choose his or her favorite skewers.

Next, this was actually my first experience with straight pull spokes, and I had an issue. The wheels were almost perfectly true out of the box, and I first went to make some minor adjustments. Note, a little truing is common with new wheelsets, at least those built with metal spokes.

Anyways, what I found was that these straight pull spokes were more prone to twisting when adjusted with a spoke wrench then traditional bent spokes. I was still able to true the wheels easily enough, but some of the blades where no longer pointing in the right direction. I suppose this is an issue for all wheels with straight pull spokes.Note that the Race TLR and Race Lite TLR wheels use traditional bent spokes.

And finally, these rounded, low profile rims probably won't be the choice for those more concerned with aerodynamics than weight. But for my rides in Colorado Rockies, they were perfect.


Like much of the bicycle industry, the team at Bontrager didn't seem to focus on road tubeless technology when it was first introduced. But recently, they have come back to the market in a way that seems like they are here to stay. The Race X Lite TLR wheelset is their top of the line road tubeless offering that combines an innovative design, light weight, and a competitive price.

The race to perfect road tubeless wheels is not over, and the team at Bontrager is trying hard to lead the pack.


  1. I am running bontrager r3 25s on my giant pslr1 tubeless-ready wheels. The tires feel great but leak 25 psi over the course of a 2 hour ride and another 15 psi overnight. A dunk test revealed the sidewalks are leaking air like crazy. I have plenty of sealant in there and have tried to get it all around on the sidewalks but this doesn't seem to help. The rubber is just too porrous, I suppose because its too thin (and hence why this is one of the lightest road tubeless on the market). Bontrager told me to return em thru my LBS and that they have not heard of this being an issue.

  2. I have noticed similar, but not as dramatic air loss. I will be posting a review of these tires soon, with more detail.

  3. I had similar results with the air loss using R3's 25's and the Bontrager juice. Once I switched to Stan's sealant, air loss was eliminated. I air up once a week, only needing to add a few psi.

  4. Thanks for taking the time to discuss this, I feel strongly about it and love learning more on this topic.

    used tires west palm beach

  5. Hello,

    I'm posting here becasue of an issue that I've been having with Bontrager TLR tires having blister/bubble problems. I have also posted to the website where a few others have reported the issue.

    I have had 5 tires have this problem in the last 3 months, 4 of them being rear tires.

    I love the setup but this is getting to be a real pain. I'm trying to get some response from Trek but they aren't really even working with the dealer to try and get more information about the details of the failure. They are warrantying everything, but I'd like to see the issue get solved and don't think that will happen unless they reach out to the folks having the issues and get more information about the riding conditions, temperature, etc., etc. Trek says that they have seen a few of these, but not many. The person I spoke with on the phone said maybe one a month. That they have maybe seen 4. I've had 5 just myself!

    I think that all of my issues are heat related (I live in the Phoenix Arizona area). I have been riding tubeless since last November and this issue did not start until April, on the first ride where it was at, or over, 100 degrees.

    FYI - I weigh about 160lbs. and am running the 700x25 TLR R3 tires (I've had it happen to an R2 tire also). I am running the tires at about 85psi rear and 80psi front.

    Anyone else out there having any similar issues.


    1. My husband is having the blistering problems. 7 new tires. Our Trek store warranties them, but they keep saying no one else is having that problem. Glad to know that we aren't the only ones.

  6. This comment has been removed by the author.

  7. Hey Jason, thanks for writing this one up. I tested out the RXL's for just one big ride and really liked them. I do wish however, that I would have run 25's instead of 23's. I rode 25c R3 TLRs when I demoed the Race Lite set and loved it. Check out my review when you have time and let me know what you think:

    What are you running as your personal road wheelset and what kind of tires (and width) are you preferring?

    Thanks again for the review,


  8. Nice article. your article is very good and E-book is well. I love as like as E-book. I think there are best e-book link in the world. If any one search more e-book i seggust their visit here and collect more
    TLR race wheel rental

  9. Hii,
    Nice blog i like your post.

    Thanks! for sharing good information.
    Kanata Rims

  10. I too have been having separation issues, in Perth, Western Australia (it gets hot here too). My last lot of tyres (all warranted) were in the "new batch". I noticed the separation this morning on my front tyre.. I'll be going away from these until the problem is solved. This one has gone on the front, it has always been on the front, and it's only been on since it cooled down.

  11. Get Hourly profit for 200 hours on every hour without any risk and without any work, best business plans ever

  12. Nice blog. I think it is useful for human being. I love this kind of blog. I have enjoyed it very much. Thanks for admin. I am searching by google using "TLR Carbon wheels". I find more site. I like most one magazine site. you can visit that site: TLR Carbon wheels Thanks everybody.

  13. It's really a nice post and i am so glad to be a part of this lovely blog.If someone looking for more updates about tyres and wheels than you can visit TyresOnWheels.

  14. Great Sharing. I like this kind of site. I am searching in Google by TLR Carbon wheels. to buy Carbon wheels. I think it is the best site. Thanks

  15. Very informative and interesting post.It is really a big help. I was searching long a while about carbon wheels .Thank you so much for sharing it with us.

  16. Based on this review, I purchased this wheelset. I now have experience with three of these RXL wheelsets (mine and those belonging to 2 riding partners) and with a Bontrager Race wheelset, all 4 wheelsets used with tubeless road tires.

    My long term experience with the RXL is unfavorable. There are two problems. First, these wheels are less durable than the cheaper (and slightly heavier) Race model. They are easily damaged on potholes. Second, the one piece rim tape system used by Bontrager is inadequate on the RXL rear rim. Unlike the front wheel, and unlike the Race model rear, the rear RXL has offset spoke holes on one side. This results in marginal and incomplete coverage of spoke holes. Of the 3 RXL wheelsets, two oozed sealant from rim vent hole and one, though seemingly air tight, episodically went totally flat. Solution is to get conventional "gorilla" tape type tubeless rim tape and discard the Bontrager one piece tape.

    I still ride the Bontrager Race wheels on my back up bike, but on the primary bike I replaced the RXLs with Hed Ardennes Plus, a much stronger and better made rim.

    Also Bontrager R3 tubeless tires, 3 of 6 failed due to air dissecting between tire layers, and same just happened to a an R3 belonging to a riding partner, only 104 miles on new tire. So we are using Schwalbe One Tubeless, 25mm.

    After 17,000 miles (two bikes) tubeless I have had no flats. Punctures have been found, but all holes sealed instantly with imperceptible loss of air. I weigh 135 lbs. and use 45-50 psi F and 60-70 R. Lower pressure = fewer punctures, faster sealing of punctures, and better riding in all regards.

  17. ------------------------------------------------------------------------------
    All the contents you mentioned in post is too good and can be very useful. I will keep it in mind, thanks for sharing the information keep updating, looking forward for more posts. Thanks
    carbon rims

  18. Thank you for the post. Great information, I was unaware of some of the pros tubeless tires have.

  19. The blog was absolutely fantastic! Lot of great information which can be helpful in some or the other way. Keep updating the blog, looking forward for more contents...Great job, keep it up..tubeless road wheels

  20. I always like your blog post because you always comes with different ideas and information. I always shared your site post with my friends. Keep posting and i will follow you.tubeless road wheels